Idiomas disponibles
Idiomas disponibles
swimming pool.
ො Do not use the fan heater in the rooms with explosive gas or while using inflammable
solvents, varnish or glue.
ො If the cord of this appliance is damaged discontinue use of this product and contact
your retailer for further instructions.
ො Keep the fan heater clean. Do not allow any objects to enter any ventilation or exhaust
opening as this may cause electric shock, or fire or damage to the heater.
WARNINGS
ො Do not use the heater in the immediate surroundings of a bath, a shower or a swim-
ming pools.
ො Always use the heater in an upright position.
ො Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles
(danger of overheating).
ො The heater must be positioned at least 50cm from furniture or other objects.
ො When the appliance is used in portable version, do not place it up against walls, furni-
ture, curtains, etc.
ො The appliance must be installed so that the switches and other controls can not be
reached by persons using the bath tub or the shower.
ො This appliance comes with a Y-type connection. Replacement of the feed cable must be
entrusted to a technician only, because such work requires special tools.
ො The appliance must not be positioned directly underneath a fixed power point.
ො Do not use the appliance while it is cooling down, in order to avoid overheating with
the attendant risk of fire.
ො Do not use the appliance in rooms less than 4m
ො The heater is fitted with a safety device which will switch off the heater in case of acci-
dental overheating (eg. Obstruction of air intake and outlet grilles, motor turning slowly
or not at all).
ො To reset, disconnect the plug from the power for a few minutes, remove the cause of
overheating then plug the appliance in again.
2. HOW TO USE
INSTALLATION
The appliance requires no installation, it should be used solely as a portable appliance.
Portable appliances are not suitable for use in a bathroom.
area.
2
