Idiomas disponibles
Idiomas disponibles
• Recharge the device battery on a regular basis, even if you do not use it for a longer
period of time (about onceevery 3 months).
• While charging place the product on a heat resistant surface. A slight heat develop-
ment during charging is normal.
OPERATION IN DETAIL:
Drying and disinfection function
Place the toothbrush you want to dry and/or disinfect in the device with the brush head
facing up and towards the UV light source
ATTENTION:
The device is only suitable for disinfection, drying and storage of toothbrushes, tooth-
paste tubes and tongue cleaners.
Manual operation
Switch on the device by pressing and holding the power button
indicator
lights permanently green.
6
Press the power button
tor
will flash blue and the unit will start air drying for about 30 minutes.
7
As soon as the blue LED goes out, the process is finished.
By pressing the power button
indicator
starts blinking red. The process takes approx. 5 minutes and is finished
8
as soon as the red LED turns off.
If you want to skip the drying process, press the power button
after switching on. Then the UV disinfection process starts directly.
After completion of the processes, the device switches off automatically within one
minute. To switch off the unit manually, briefly press and hold the power button
until the power indicator
again to start the drying process. The drying process indica-
5
again, the UV disinfection process starts. The UV
5
turns off.
6
11
USER GUIDE
. Then close the lid
3
.
9
until the power
5
twice in succession
5
5
