Idiomas disponibles
Idiomas disponibles
Control panel (same for both models):
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 85%. Place the unit
in a way that ensures good air circulation. Maintain a minimum clearance of 10 cm from any wall of the unit.
Keep the unit away from any hot surfaces. Always operate the unit on a level, stable, clean, fireproof, and dry
surface and out of the reach of children and persons with impaired mental, sensory, and intellectual
functions. Place the unit in such a way that the main plug can be reached at any time. Ensure that the power
supply to the unit corresponds to that specified on the identification plate!
Before the first use, clean the inside of the refrigerator with a damp cloth soaked in lukewarm water and a
mild detergent intended for contact with food, e.g. dishwashing liquid or a small amount of baking soda. Wipe
the device dry before switching on.
3.3.
Working with the device
Connect the power supply to the refrigerator using a suitable cable - a power supply or a cable to connect to
the car lighter socket.
Use the power switch to start the device. At this point, a sound will be heard and after a while, the display
will show the current operating parameters.
1 - Power switch.
2 - Settings button.
3 - Indicator of the current temperature
inside the refrigerator.
4 - Battery protection mode from which the
refrigerator is powered.
5 - The current battery status from which
the refrigerator is powered (for
information).
6 - Indicator of the current battery voltage
from which the refrigerator is powered.
7 - Cooling mode (MAX or ECO)
8 - Temperature setting buttons.
9 - USB socket.
