Idiomas disponibles
Idiomas disponibles
GENERAL INFORMATION
ƒ Do not throw or drop
ƒ The LED cover cannot be replaced. If the cover is damaged, the product must be disposed of.
ƒ The LED light source cannot be replaced. If the LED has reached the end of its service life, the complete
lamp must be replaced.
ƒ Do not open or modify the product! Repair work shall only be carried out by the manufacturer or by a
service technician appointed by the manufacturer or by a similarly qualified person.
ƒ Disconnect the device from the power supply only by pulling on the plug or plug housing, never on the cable.
ƒ Information for the light and mains adapter as well as mains voltage on the socket must match with the type
plate.
ƒ The lamp shall not be placed face-down or allowed to topple face-down.
RECHARGEABLE BATTERY PACK
The product contains a non-replaceable, rechargeable battery pack. If the rechargeable battery pack is empty,
recharge it immediately.
Once fully charged, remove from the charger.
In the event of liquid leaking from the power source, remove this with protective gloves and a dry cloth.
ENVIRONMENTAL INFORMATION | DISPOSAL
Dispose of packaging after sorting by material type. Cardboard and cardboard to the waste paper, film to
the recycling collection.
Dispose of the unusable product in accordance with legal provisions. The „waste bin" symbol indicates
that, in the EU, it is not permitted to dispose of electrical equipment in household waste. Use the return and
collection systems in your area or contact the dealer from whom you purchased the product.
For disposal, pass the product on to a specialist disposal point for old equipment. Do not dispose of the device
with household waste!
Always dispose of used batteries & rechargeable batteries in accordance with the local regulations and
requirements.
In this way you will fulfil your legal obligations and contribute to environmental protection.
PRODUCT DESCRIPTION
1. Main LED
2. Charge indicator A
3. TOP LED
4. On/off button
5. Dimming wheel
6. 360° swivel joint
7. Swivel base
8. Fold-out hook
9. Integrated magnets
10. Charge socket with rubber cover
11. Charge indicator B
12. Charge contacts for charge station
13. USB type-C port
FIRST USE
Charge fully before first use
Switch on the light by pressing the On/Off button:
1x Main LED (with dimming wheel function)
2x TOP LED
3x Off
LED display:
Charge display A during charging:
ƒ Red flashing: Charging mode
ƒ Off: Rechargeable battery pack fully charged
Charge display B during charging and/or operation:
ƒ LED shows charge status / battery capacity
Simultaneous charging and lighting is possible > Lighting power will be restricted
Mains failure electronics (emergency light function):
Connect light to the charging cable whilst switched on (main LED) or place it in the charge station (accessory).
Light switches off automatically and switches on automatically in the event of a mains power failure (lighting
power is dimmed in order to achieve a longer battery life).
Charging tray:
ƒ Plug a type-C charge cable into the charge socket on the underside and connect with a USB charger.
ƒ Place the workshop light straight in the station so that the charging contacts make contact correctly.
ƒ Charging starts automatically.
The product complies with the requirements from the EU directives.
Subject to technical changes. We assume no liability for printing errors.
8
