CruxCare C2 Manual Del Usuario página 16

7. Indication of low batteries
CruxCare C2 Pager (CCPAG02)
CruxCare call buttons red & blue
(CCCB01R CCCB02B)*
CruxCare bed mat Pro (CCBP-01)
CruxCare call button Pro (CCBS-01)
CruxCare bathroom call button Pro
Tiiwee window & door sensor (TWWS03)*
*IMPORTANT: On these devices, a low battery indication is not shown on the C2
Pager. It is advised to replace batteries at least every six months.
8. How to replace the batteries
C2 Pager
IMPORTANT: Do not use rechargeable batteries.
open the battery compartment and insert two new AA alkaline batteries. Replace
the cover and tighten the screw.
CruxCare call buttons red and blue CCCB01R
en CCCB02B
Open the call button at the site where the little cut-out is
visible at the rim of the call button. You can use your
fingernail or another appropriate device. The call button
will open easily.Now, you will see the button battery.
Replace the battery with a new CR2450 (3V) battery. Please note the correct
polarity. Please test the call button before use.
Product
(CCBR-01)
Low battery indication
Pager status LED flashes red
No low battery indication. Replace
batteries every six months
Pager status LED and respective
"DEVICE" LED flash red
Pager status LED and respective
"DEVICE" LED flash red
Pager status LED and respective
"DEVICE" LED flash red
LED light of the sensor is blinking
or is continuous lit
Use a Phillips screwdriver to
14