Samoa METER Manual De Instrucciones página 4

B Notes

.................................................................................................................................................

C Using the manual.

• The following symbols are used to highlight important notes and information:

Warning

• The instructions provided by this manual satisfy both the Installer's and the Users'

requirements (Manager and Operators) of the METER.

In the Table of Contents a symbol alongside each paragraph indicates the person this

information is intended for.

Operator

Manager

Installer

This symbol highlights important aspects as to the

CORRECT USE of the METER.

This symbol highlights important aspects as to SAFETY.

This symbol highlights important aspects as to avoid

POLLUTION HAZARDS.

All paragraphs marked with this symbol concern the Operator. The

operator is the person who uses the METER to carry out dispensing

operations. Therefore the Operator is not expected to read paragraphs

other than those marked with this symbol.

All paragraphs marked with this symbol concern the Manager. The

METER offers several options (selection of the Unit of Measurement,

selection of the Number of Decimal Digits, Calibration, etc.). At least

one skilled Operator (hereinafter referred to as the Manager) must

know this data in order to allow the Operators to use the METER

correctly. The Manager must read thoroughly all paragraphs

concerning the Manager and the Operator.

All paragraphs marked with this symbol concern the Installer only. He

is responsible for installing the METER and is required to read the

manual thoroughly, no paragraph omitted.