Idiomas disponibles
Idiomas disponibles
Clothing worn during the appliance operation must be
adequate, tight and closed, for example, a work boiler suit. Do
not wear loose clothing or jewelry. Keep hair, clothing and
gloves away from rotating parts.
The following precautions and procedures should also be
followed to avoid accidents:
▪ While operating the appliance, adopt a stable position and
always keep your balance. Hold the power tool firmly to
ensure continuous operation and withstand unexpected
situations;
▪ In case the blades become jammed, immediately release the
"ON/OFF" trigger switch and do not move the planer over the
workpiece until the rotating attachment stops completely;
▪ To avoid displacements or projections use clamping devices
to ensure a safe performance. Place/keep the workpiece in a
correct and stable position;
▪ Never put the planer down before the blade has come to a
complete stop. The rotating attachment may come into
contact with the support area, causing you to lose control of
the appliance;
▪ The blades may become too hot during operation. Avoid
touching them, they can cause burns;
▪ Make sure that the ventilation slots are not clogged. Do not
insert any objects over the ventilation slots;
▪ Avoid using the power tool on wood coated with paint
containing lead or other materials that are harmful to health.
There are certain types of powder (oak and beech) which are
classified as carcinogenic substances when they have
additives for wood preservation. Any contact or inhalation of
dust may cause allergic reactions and/or breathing disorders.
30
Maintenance and cleaning
Before
performing
cleaning,
maintenance work, always unplug the power cord.
Replace worn out or damaged parts immediately, so that the
power tool is always in a safe operating condition.
Cleaning:
Always keep the power tool clean and dry, free from oil,
lubricants or grease. Clean all electric planer's components and
accessories after operation.
Do not use aggressive cleaning products. These products may
damage plastics and metals, compromising the safe operation
of the power tool.
Maintenance:
Only maintenance works described in this instruction manual
may be carried out; all other works must be performed by an
official dealer.
Use only VITO-approved blades and attachable accessories for
this appliance or technically identical parts. Failure to do so may
result in personal injuries or damages to the electric planer. If in
doubt, if you lack knowledge or resources, you should contact
an official dealer.
Technical Assistance
Your electric planer should only be serviced by the
manufacturer's internal service personnel, or other qualified
personnel, replacing any necessary parts with original parts.
adjusting,
repairing
and
