Standby Mode - Whirlpool WM1807 Instrucciones Para El Usuario

q w e r
t y o
u i

STANDBY MODE

The oven is in standby mode when the clock is displayed (or, if the clock has not been
set, the display will show ":").
ECO STANDYBY: The function is set in order to have power saving. During Standby
mode,you can press "+" and "-" buttons simultaneously to enter ECO STANDBY mode.
After cooking end, the display will show time or ":" for 10 seconds then go to ECO
STANDBY mode.Press the two buttons again to quit the mode.
START PROTECTION / DOOR LOCk
This automatic lock function is activated one minute after the oven has been returned to
"Standby mode".
When the lock function is active the door must be opened and closed in order to start
the cooking, otherwise the display will show "door".
ADD / STIR / TURN FOOD
i
Depending on the selected function, it could be needed to add / stir / turn food during
cooking. In these cases the oven will pause cooking and it will ask you to perform the
needed action.
When required, you should:
* Open the door.
* Add or Stir or Turn the food (depending on the required action).
* Close the door and restart by pressing JET START button.
Notes: if the door is not opened within 2 minutes from the request to Stir or Turn the food,
the microwave oven will continue the cooking process (in this case the final result may not
be the optimal one). If the door is not opened within 2 minutes from the request to Add
the food, the microwave oven will go to the Standby mode.
10
Microwave Icon
q
Defrost Icon
w
Clock/Insert time Icon
e
Microwave power (watt) Icon
r
Keep Warm Icon
t
Soften/Melt Icon
y
Auto Clean Icon
u
Mute Icon
i
Weight (grams) Icon
o
DOOR
PAUSE OR STOP COOkING
To pause cooking:
The cooking can be paused to check, add or turn or stir the food by opening the door.
Press STOP button once ,the functions can be paused as what they are, press STOP
button twice,the functions will stop.
The setting will be maintained for 5 minutes.
To continue cooking:
Close the door and press the JET START button. The cooking is resumed from where it
was paused.
If you don't want to continue cooking you can:
Remove the food, close the door and press the STOP button.
When the cooking is finished:
The display will show the text "End". An acoustic beep will signal once a minute for 2 minutes.
Please note that reducing or stopping this programmed cooling cycle will not have a
negative impact on the functioning of the product.
CLOCk
To set the clock of your appliance:
In standby, press the Clock
q
Press + / - to set the hour.
w
Press Clock/JET START button to confirm.
e
Press + / - to set the minute.
r
Press Clock/JET START to confirm the setting.
t
Every time after cooking process is completed,
the screen shows "End" and issued a prompt
until opened the door to return standby.
Tips and suggestions:
When plug in, the screen shows"12:00" ( "12"
•
flashing ), 1 minute later return to standby
(before returning standby can directly set
clock).
In the process of cooking set, no operating
•
system automatically return to standby mode
in 1 minute.
11