Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation
1. Turn on the power, the screen will display set current volume and ventilator will commence operation.
2. Adjust welding current and arc-strike according to requirements.
WARNING! Ensure that power is disconnected before connecting the welding cable and ground
cable to the machine. Ensure they are firmly connected before connecting to your power source.
Description of main parts
Maintenance
1. Remove dust by dry and clean compressed air regularly, if welding machine is operating in environments of high pollution the machine will need more regular
cleaning.
2. Compressed air should not be too powerful as this may damage fragile components inside the machine.
NEVER OPEN THIS MACHINE WITHOUT FIRST DISCONNECTING POWER.
1. Avoid water and steam in close proximity to the machine, in it comes into contact with water, DO NOT USE.
2. If welder is not used for a long period, store in dry environment.
WARNING! It is recommended that only a qualified technician tests and attempts repair on this
high voltage machine. Incorrect diagnoses or repair may lead to serious injury or death!
1
Strap
Power indicator light
2
Abnormal indicator light
3
4
Digital Display
5
Current adjusting knob
6
Positive output
Negative output
7
WWW.BORMANNTOOLS.COM
EN
4
Tabla de contenido
