Imetec S0301 Instrucciones De Uso página 18

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
This chapter describes the most common problems that can arise using the
EN
appliance. If the problems cannot be solved with the information below, please
contact the Authorised Assistance Centre.
Problem
The LEDs on the control unit do not light
up.
The blue warning light is flashing.
Temperature LED (6) is flashing.
The product has been used incorrectly or
is damaged.
The power cable or another internal wire
is damaged.
The control unit is damaged.
There are holes or tears in the fabric or
stubborn creases that do not spread out.
The packaging of the appliance is made of recyclable materials. Dispose of the packaging in
accordance with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), the
crossed bin symbol on the appliance or its packaging indicates that the appliance must be
disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for electrical
and electronic equipment. Alternatively, instead of handling the disposal, the user can hand over the
appliance to the retailer when a new, equivalent one is purchased. The user can hand over electronic
products measuring less than 25 cm to retailers of electronic products having a sales area of at least
400 m
free of charge and with no obligation to buy. Proper waste sorting prior to sending the equipment
2
no longer used for recycling, processing and disposal in a manner that respects the environment
contributes towards avoiding negative impacts on the environment and on health and promotes the
reuse and/or recycling of the equipment's material.
17
TROUBLESHOOTING
Check that the control unit plug is fully inserted in the socket. If the
LEDs remain off, remove the control unit plug from the socket and
return the underblanket to an authorised technical service centre.
Return the heating pad to an authorised technical service centre to
be checked.
DISPOSAL
Solution
loading