Idiomas disponibles
Idiomas disponibles
SETUP
1. Place the cooler on a flat surface (Fig 1).
2. Open the water tank door and fill with water (Fig 2).
We recommend to use a pitcher or a measuring cup.
3. Plug an USB power adapter into an outlet. Then, insert
a larger USB cable into the adapter, and plug the small
end into the power port on the back of the cooler (Fig 3).
NOTE: You can use the cooler too plugging the USB cable
into a computer.
USAGE
• Press the power button to power on the air cooler
(Fig 4).
• Set the fan speed by pressing
choose: low, medium and high mode. An indicator
light will be on, showing which speed is currently
running (Fig 5).
• The cooler has a LED light on the side. You can
choose the colour of the light by pressing
ton. You can select one colour or keep the colours
changing all over the time (Fig 6). LED colours: Blue,
red, white, teal, purple, yellow, green or colour cycle.
• When you are done, press the power button again to
turn off the cooler.
NOTE: We recommend running the cooler on high speed
mode for at least 5 minutes before powering off, for a
good drying of the device.
button. You can
but-
