Assembling The Heater; Installation - Qlima PEC 3015 S Instrucciones De Uso

• During operation and just after operation
• Switch off the appliance when it is
• Do not cover or obstruct the heater when
• Disconnect from mains during installation,
If you fail to consult and/or follow up the
rules, instructions and explanation, the
warranty will no longer be valid, and the
manufacturer will no longer deal with
any damage to the appliance and/or your
environment under the warranty.

ASSEMBLING THE HEATER

•
•
•
•

INSTALLATION

•
4
28
the appliance will be extremely hot. NEVER
touch it during operation or just operation.
NEVER move the appliance during this
time.
unattended.
in use.
cleaning and/or lamp replacement and
ensure the lamp is cool.
The manufacturer is not responsible for any harm or damage if attention is
not paid to the points described above.
The use of this product and the elements required for that purpose is entirely
at the end user's own risk.
The heating lights can be vulnerable. Make sure to handle the appliance with
care. Avoid vibrations.
Never immerse in water/liquids. Risk of death
Make sure to mount the appliance only on a firm and sturdy underground. In
case of doubt have underground checked by an expert.
WARNING - this appliance must be connected to an earthed power socket.
The heater is fitted with a supply cable and molded plug, therefore the ter-
minals should not be interfered with. The following points should be consi-
dered when positioning the heater:
Install the appliance and keep the distances as in the drawing. All distances
are in mm.