Idiomas disponibles
Idiomas disponibles
OPERATION MANUAL AND INSTRUCTIONS
ISTRUZIONI PER L'USO
BATTERY INSTALLATION/REPLACEMENT
Install or replace the batteries as follows:
• Loosen the four screws of the battery compartment on the back (picture 2-l).
• Remove the flat batteries, and install the new batteries, paying attention to the polarity (2 AAA batteries).
• Close the battery compartment, and tighten the four screws.
• Remove the batteries, if the digital angle indicator is not used for an extended period.
• If the battery is flat, the battery symbol will be shown on the display.
DIGITAL ANGLE INDICATOR SAFETY
• Do not drop or hit the digital angle indicator.
• Do not use the digital angle indicator in humid or wet environments.
• To clean the digital angle indicator, use a dry cloth. Do not use alcohol or diluents.
• Do not place the digital angle indicator near magnetic fields.
• Do not modify the digital angle indicator. Changes may affect operation.
TECHNICAL DATA
MEASUREMENT RANGE
ACCURACY
RESOLUTION
SCALE
PROGRAMMABLE ANGLE VALUES
STORED ANGLE VALUES
POWER SUPPLY
OPERATING TEMPERATURE
STORAGE TEMPERATURE
HUMIDITY
AUTO POWER OFF
WEIGHT
KEY TO SYMBOLS
a: LED indicators
b: buzzer
d: digital display
c: start of measurement/menu button (C)
DIGITAL ANGLE INDICATOR OPERATION
This device has been designed for right-hand/left-hand angle torque of screws and nuts in combination with impact wrenches,
ratchets or levers.
• Lay the angle indicator on a flat surface and press the ON button (C). The set torque direction will be shown on the display:
- PoS (clockwise)
- nEG (anticlockwise)
When the symbol 0000 is shown on the display, wait a few seconds. After the required value has been set, the display will show
the previously set angle of torsion.
• Press button M, selecting one of the 9 preset angle values. A new angle value can be set by pressing buttons ▲and ▼. The
new value will automatically be saved in memory M.
8
0° – 999.0°
± 2%
0.1°
1° to 360° (increment 0.1°)
9
50
2 AAA batteries
-10 °C ÷ 60 °C
-20 °C ÷ 70 °C
Max. 90%
After approximately 2 minutes
95 g
m: memory button (M)
+ button ▲
- button ▼
ON / CANC button (S/S)
o: magnet
l: battery compartment
r: RESET button
EN
I
