General Warnings; General Information - Bresser 8020310 Cm3000 Instrucciones De Uso

ABOuT ThIS InSTRuCTIOn mAnuAl
These operating instructions are to be consid-
ered a component of the device. Please read the
safety instructions and the operating instructions care-
fully before use. Keep these instructions for renewed
use at a later date. When the device is sold or given to
someone else, the instruction manual must be provid-
ed to the new owner/user of the product.
This product is intended only for private use.

GEnERAl WARnInGS

ChOKInG hAZARD!
Keep packaging material, like plastic bags and rubber
bands, out of the reach of children, as these materials
pose a choking hazard.
RISK of ElECTRIC ShOCK!
This device contains electronic components that oper-
ate via a power source (batteries). Children should only
use the device under adult supervision. Only use the
device as described in the manual; otherwise, you run
the risk of an electric shock.
RISK of FIRE/EXPlOSIOn!
Do not expose the device to high temperatures. Use
only the recommended batteries. Do not short-circuit
the device or batteries, or throw them into a fire. Exces-
sive heat or improper handling could trigger a short-cir-
cuit, a fire or an explosion!
nOTE!
Do not immerse the unit in water.
Do not subject the unit to excessive force, shock, dust,
extreme temperature or high humidity, which may result
in malfunction, shorter electronic life span, damaged
batteries and distorted parts.
Do not disassemble the device. In the event of a defect,
please contact your dealer. The dealer will contact the
Service Centre and can send the device in to be re-
paired, if necessary.
Use only the recommended batteries. Always replace
weak or empty batteries with a new, complete set of
batteries at full capacity. Do not use batteries from dif-
ferent brands or with different capacities. Remove the
batteries from the unit if it has not been used for a long
time.
The manufacturer is not liable for damage related to
improperly installed batteries!
6

GEnERAl InFORmATIOn

This item is available in the following variants. The func-
tions and technical data are the same. They only differ
in its design/in its colour.
8020310 CM3000: MyTime Thermo-/Hygro, black
8020310 GYE000: MyTime Thermo-/Hygro, white
8020310 E8G000: MyTime Thermo-/Hygro, red
8020310 WXH000: MyTime Thermo-/Hygro, blue
8020310 LXD000: MyTime Thermo-/Hygro, yellow
8020310 W9H000: MyTime Thermo-/Hygro, pink
8020310 B4K000: MyTime Thermo-/Hygro, green
8020310 5SJ000: MyTime Thermo-/Hygro, brown
8020310 TJ5000: MyTime Thermo-/Hygro, purple
SCOPE OF DElIvERy
Wall clock, Instruction manual
Required batteries: 1 x 1.5V battery (Size AA/LR6)
Batteries not included with purchase.
PARTS OvERvIEW
Wall clock (Fig. 2)
1. Dial plate
2. Clock hands (hours, minutes, seconds)
3. Humidity display (indoor)
4. Temperature display (indoor)
5. Wall mount
6. Battery compartment
7. M.SET button
8. RESET button
9. REC button
GETTInG STARTED/POWER SuPPly
nOTE!
Insert the batteries for the remote sensor first and then
insert the batteries for the wall clock. Make sure to
place the batteries strictly according to the right polar-
ities (+/-) as shown in the battery compartment.
1. Remove the locking pin from the clockwork.
The clock can be operated only after the pin has
been removed.
2. Insert one battery (1.5V, AA/LR6) into battery com-
partment (6).
TImE SETTInG
nOTE!
After the clock received the DCF time signal the time
will be set according to the Central European time
(CET). Summer and winter time change (and reverse)
is also set automatically. Other deviating times can be
set manually only.
(Fig. 1)