ASSEMBLY MONTAJE
CANOPY
DOSEL
6)
• To install the canopy: Add the canopy
frame into the designated slots located
on the child tray (Fig. 6a).
• To open the canopy: Behind the main
fold mechanism use the strap and snap
closure to anchor the canopy. Firmly
spread out both sides of the canopy
(Fig 6b).
• Install mosquito net: Unzip and
pull out the net from the storage pocket.
Stretch the net around the top edge of
the frame and hook each corner to the
the circle tabs. Repeat for the other side
and ensure to hook the net to all 4 tabs
(Fig. 6c).
• To store away the mosquito net: Lift
the mosquito net at the elastic end and
start to roll toward canopy. Locate the
zipper attached to canopy end and
connect zipper to track. Continue to tuck
canopy into pocket while zipping pocket
closed (Fig. 6d).
NOTE: Tuck and Zip in
sections.
• To remove the canopy: Press the tab
on each end of the canopy, and lift up
the entire canopy from the bottom ends
slots of the child tray (Fig. 6e).
• To remove the child tray: push the
tabs outward and pull out the child tray
(Fig.
6f).
NOTE: The canopy may also
be installed without the child tray. Insert
the ends into holes.
12
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Mosquito net
Mosquitera
Fig. 6a
Fig. 6b
tab
pestaña
Fig. 6c
ASSEMBLY MONTAJE
Fig. 6d
Fig. 6e
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 6f
13
