Idiomas disponibles
Idiomas disponibles
ADDITIONAL SAFETYINSTRUCTIONS
SPECIFIC SAFETY INSTRUCTIONS FOR POWER
SCREWDRIVERS:
a) Hold the appliance by the insulated handle grips
when performing work in which the screw may come
into contact with hidden wiring or its own power cord.
If the screw were to come into contact with a live
electrical cable, metal parts of the appliance could also
become live and cause an electric shock.
SPECIAL SAFETY DIRECTIONS FOR BATTERY-
OPERATED TOOLS
a) Do not subject the battery to strong sunlight over
long periods and do not leave it on a heater. Heat
damages the battery and there is a risk of explosion.
b) Allow a hot battery to cool before charging.
c) Do not open up the battery and avoid mechanical
damage to the battery. Risk of short circuit and fumes
may be emitted that irritate the respiratory tract. Ensure
fresh air and seek medical assistance in the event of
discomfort.
Correct handling of the battery charger
a) This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in
a safeway and understand the hazardsinvolved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.
b) Do not use the charger to charge non-rechargeable
batteries.
c) Before each use, check the charger, cable and plug
and have them repaired by qualified professionals and
only with original parts. Do not use a defective charger
and do not open it up yourself. This ensures that the
safety of the device is maintained.
d) Connect the charger only to a socket with an earth.
Ensure
that
the
mains
specifications on the charger rating plate. Risk of
electric shock.
e) Disconnect the charger from the mains before
closing or opening connection to the battery / power
tool / device. This ensures that the battery and charger
are not damaged.
f) Keep the charger clean and away from wet and rain.
Do not use the charger outdoors. Dirt and the entry of
water increase the risk of electric shock.
g) Operate the charger only with the appropriate
original batteries. Charging other batteries may result
in injuries and risk of fire.
h) Avoid mechanical damage to the charger. This can
result in internal short circuits.
i) Do not operate the charger on a combustible surface
(e.g. paper, textiles). Risk of fire due to heating during
charging.
j) In order to minimise the risk of electric shock, pull
the charger plug out of the socket prior to cleaning it.
k) If the power cable for this equipment is damaged, it
must be replaced by the manufacturer, a customer
service agent of the same or a similarly qualified
voltage
matches
the
person in order to prevent hazards.
- Use protective equipment against
noise, dust and vibrations!!! KEEP
THESE SAFETY INSTRUCTIONS FOR
FUTURE REFERENCE!!!
DESCRIPTION (A)
The cordless screwdriver can only be used for scre-
wing. Do not use tool accessories in a way other than
the way they are designed for! All other applications
are expressly excluded.
1. Chuck
2. Adapter socket
3. Handle
4. Switch /Switch
5. Adapter
6. Direction of rotation switch
7. LED lighting
8. LED Battery charge status.
9. Button for adjusting the position of the handle
Pictograms
Pictograms listed on the product packaging:
a) Working voltage
b) Idle speed
c) Battery capacity
USE AND OPERATION
ASIST tools are intended for home or hobby use only.
The manufacturer and importer do not recommend
using this tool in extreme conditions and under heavy
loads.
Any other additional requirements must be subject
to agreement between the manufacturer and the
customer.
Charging (B)
The charger and accessories in this package are de-
signed specifically for the given cordless screwdriver.
Do not try to use them with another device.
Do not charge the battery at temperatures below 4C°.
In a warm environment or after long-term use, the
built-in battery may become too hot. Allow the battery
/ cordless screwdriver to cool down before rechar-
ging.
Connect the charger plug to the charging socket (2)
(on the back of the cordless screwdriver) - see fig. B
and insert the charger plug into the electrical outlet.
plugs.
34
