Idiomas disponibles
Idiomas disponibles
The minimum free space has to be 1m from combustible materials and/or any side of the wall (left, right
or rear) and 1.80m from the ceiling.
The appliance is not equipped with any protector to prevent burns.
Do not stand too close to the appliance while it is in operation.
MAINTENANCE AND CLEANING
To enjoy years of outstanding performance from your device, the following device maintenance services
are required:
It is recommended that the appliance be inspected at least once a year by a Qualified Service Technician.
●
More frequent cleaning may be advisable depending on the use of the appliance.
Keep exterior surfaces free and clean of combustible materials.
●
Use warm soapy water for cleaning. NEVER use flammable or corrosive cleaning products.
●
While washing the unit, be sure to keep the area around the burner assembly dry at all times. If the
●
throttle is exposed to water in any way, DO NOT attempt to use it. It must be replaced.
The burner and the LPG compartment where the appliance's air ducts circulate must be kept clean.
●
Airflow must be free of obstructions. Keep controls, burner, and circulation lines clean. Signs of pos-
●
sible blockage include: Gas odor with extremely yellow flame slant / Device brightness is excessively
uneven / Device makes popping noises.
Spiders and insects can nest in the burner or in the openings. This dangerous condition can damage
●
the appliance and make it unsafe for use. Clean burner ports using heavy duty pipe cleaner. Com-
pressed air can help remove the smallest particles.
After the burner and glass have cooled completely, clean them and use a soft brush to remove light
●
stains, loose dirt and dirt. Dry with a soft cloth.
Clean the container and then put the crystals back in the correct position.
●
For proper cleaning, a vacuum cleaner can be used.
●
Note: In a salty air environment (such as near the sea), corrosion occurs more rapidly than
normal. Frequently check corroded areas and repair quickly. Persistent staining, discoloration
and possibly rust pitting may occur due to exposure to harsh outdoor conditions. Be careful
not to let any powder or solvent come into contact with painted or plastic components, as they
could be damaged.
After prolonged use, some discoloration may appear.
Make sure both gas supplies are in the OFF position before changing the battery. Please refer to the bat-
tery mounting process.
Contact the manufacturer or distributor for information on replacing hoses, thermocouples, ignitors, crys-
tals, etc.
Attention: never use unauthorized parts or components for this device.
Use only original spare parts and components.
Failure to do so may void the warranty on this product and result in a hazardous condition.
STORAGE (after use)
Turn the control knob to the "OFF" position.
Turn the LPG regulator to the "OFF" position.
Store the device in a clean and dry place, away from direct sunlight; store upright in an area protected
MANUAL NEW ATALAYA.indd 25
MANUAL NEW ATALAYA.indd 25
25
12/7/22 12:02
12/7/22 12:02
