3.2 MAIN FUNCTIONS.
3.2.1 ON/OFF AND SET POINT TEMPERATURE
Main functionalities allows to activate or deactivate the climatization of the zone where the
thermostat is and define the set-point temperature for that zone.
Activate or deactivate of the climatization on the zone is done by pressing on the
Selection of the set point temperature
steps of 0,5ºC (from 64 to 86ºF at steps of 1ºF). The permitted range is as follows:
• Heating mode: 15ºC – 30ºC
• Cooling mode: 18ºC – 30ºC
Note: After every zone has arrived to its set-point temperature, the zone will maintain the
3.2.2. WORKING MODE *
*
only for master thermostat.
The working mode defines how the system works, It is set on the master thermostat and is
common for all the zones, in other words, every zone will work with the same working mode.
In the case of having your Blueface set as master for the installation, this icon will be displayed
in white; in the case of having it configured as zone thermostat it will be displayed in grey color.
Selectable working modes are as follows:
• STOP
The air conditioning system will remain not working independently of the demand
status of every zone. Also every motorized outlet will stay shut
• VENTILATION
On this mode the air conditioning unit will be set to on at Ventilation mode any time
any zone is under demand (T
• COOLING
On this mode the air conditioning unit will be set to on at Cooling mode any time any
zone is under demand (T
Cooling modes available on master thermostat will be:
4
When closing motorized outlets, due to security reasons, it will maintain the last one opened for 4 minutes
is achieved using the selection arrows
gignable en soufflé
< T
Set-Poing
ambient
< T
).
Set-Poing
ambient
Air cooling
* Radiant cooling.
* Combined air-radiant cooling.
Note Availables only when enabled.
4
.
).
icon
at
31