Robern CRAFT Serie Instrucciones De Instalación página 5

Ocultar thumbs Ver también para CRAFT Serie:

Idiomas disponibles

CHESTNUT HILL 24 / SENDAI 24

4. Apply a 1/4" (6mm) bead of silicone sealant on vanity and sink lip and lower the custom top onto the silicone sealant.

NOTE: The back edge of the top must be flush against the wall and equal left and right overhang on each side of the vanity.

5. Verify that the top is level. If the top is not level, gently press down on the highest corner until level.

6. Wipe away excess silicone sealant. Allow the sealant to set according to the sealant manufacturer's instructions.

7. Connect the trap to the drain. Complete the faucet connections. Vanity drawers can be removed for easy access. Run water and

check for leaks.

800.877.2376

www.robern.com

Part no. 209-1434 03/22/2023

Craft Series Undermount Sink

Cb-lav2um-101