Psychomed PSiO Guia De Inicio Rapido página 19

Why do a « RESET » ?
19
If you push the "RESET" button, it's important to fully charge the battery using
the AC adapter before disconnecting the USB cable from the PSiO. The micro-
controller always sees the battery as discharged when a RESET is done. When
connected to the transformer with the battery charging, the micro-controller
receives a « charged battery » signal when it is 100% charged. The PSiO resyn-
chronizes immediately and operates normally. When the PSiO isn't connected
to the charger, the PSiO battery icon will display « discharged battery » after a
RESET, regardless of the real battery charge level. If you have to do a RESET,
recharge the PSiO until the battery light shows « fully charged ». Then unplug it
and use it normally.
Charged battery icon / Flat battery icon
The icon on the screen will display four solid bars when the battery is fully
charged. The battery icon will show no bars when the battery is nearly fl at. You
should charge the PSiO using the AC adapter.