Manuales relacionados para PRETUL CALA-P3
Resumen de contenidos para PRETUL CALA-P3
- Página 1 Manual Jig saw CALA-P3 0.5 Hp Power Applies for: Model Code CALA-P3 24047 Read this manual thoroughly CAUTION before using the tool.
- Página 2 Manual before Parts using the tool. Start up Keep this manual for future references. Maintenance The illustrations in this manual are for reference Notes only. They might be different from the real tool. Authorized service centers Warranty policy CALA-P3 ENGLISH...
- Página 3 Technical data CALA-P3 Code 24047 Description Jig saw Voltage 127 V Frequency 60 Hz Current 3,1 A Power 0.5 Hp Speed 3 000 strokes / min Miter Cutting 0° - 45° left / right Cutting Capacity Wood 2.1” | Plastic 0.3” | Metal 0.2”...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for jig saws Select the adequate blade When operating the jig saw CAUTION CAUTION • Select the adequate blade for the • Hold the tool by the insulated griping material. Reduce the risk of severe personal injury and parts when there is risk of making contact with hidden make the job faster.
- Página 6 Parts Handle Continuous use button Switch Power Cord Power Protector Security Security Cord Guard Guard Saw Blade Support Dust Collector Base Roller Plate Guide Start Up Installation of the Saw Blade • The jig saw support opening shall be free of sawdust. •...
- Página 7 Start Up Start and Operation Control • Intermittent Operation: Connect the plug into the power outlet. Press the switch (A) to start the tool. To stop the tool, simply release the switch. • Continuous Operation: Connect the plug into the power outlet. Press the switch (A) and block it pressing the continuous use button (B).
- Página 8 Maintenance WARNING Disconnect the cord from the power outlet before making adjustments, service or maintenance on the tool. Cleansing and Care • Keep the tool free of dust. Never use water or chemical-based cleansing materials to clean the tool. Clean only using a clean and dry cloth. •...
- Página 9 Notes ENGLISH...
- Página 10 Notes ENGLISH...
- Página 11 Authorized Service Centers In the event of any problem contacting a Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Authorized Service Center. DE TODO PARA LA CONSTRUCCIÓN SUCURSAL MONTERREY AGUASCALIENTES...
- Página 12 Warranty policy Model Code Brand CALA-P3 24047 This product, its parts and components have a one year warranty against defects in its manufacture, operation and workmanship, except when: the product has been used in conditions other than those recommended, or has not been operated according to the instructions, or has been altered or repaired by personnel not authorized by .