GENERAL FUNCTIONS AND CONTROLS
Figure 1
1
12
A. MEDIA PLAYER (FIGURE 1)
1. POWER SWITCH - This is the main power ON/OFF switch.
2. LCD DISPLAY - T his high quality LCD display indicates all the functions, as they are ocurring.
3. USB/SD BUTTON - Press this button to toggle between the USBport or SD Card slot.
4. SD CARD SLOT - This is where you load your SD card.
5. USB PORT - This is the USB port where you can insert a USB stick, USB card reader, or compatible
external hard drive for playback.
6. AUX/MP3 LEVEL -
7. EQ
CONTROL
BUTTON - Press this button can transform different sound effect.
8. STOP/PLAY/PREVIOUS TRACK/NEXT TRACK
STOP - Press this button to stop the current track.
PLAY - Press this button to start the track .
PREVIOUS TRACK - P ress this button to go back to the previous track.
NEXT TRACK -
9. REPEAT BUTTON - P ress this button to repeat the track.
B. MEDIA OPERATOR - REAR (FIGURE 2)
10. AC CONNECTION - This connector is used to supply main power to the unit via included
detachable power cord The power connection uses an IEC type connector, use only the supplied,
polarized AC power cord Use only a power cord that matches this type of connection. Be sure to
only connect this unit to a power outlet that matches theprinted power label on the unit Never use
a power cord when the ground prong has been removed or broken off. The ground prong is used to
reduce the risk of electrical shock in case of an electrical short. This cord is designed to fit in one
direction only. Do not attempt to force a cord if it does not fit, be sure the cord is being inserted properly.
11. BALANCED XLR MASTER OUTPUTS JACKS - The Master Output includes a pair of XLR
Balanced jacks as well as a pair of
balanced output signal. These jacks should be used when you will be driving an amp or other audio
2
3
4
9
8
11
This knob is to control the
Press this button to go to next track.
.
RCA Unba lanced Jacks
2
5
7
6
6
12
mp3 l
User Manual /Manual de usuario
2
3
4
9
8
11
10
evel.
.
.
.
. The 3-pin XLR jacks send a
ES
5
7
Figure 2
MMP 4