INVENTOR RS3ION-8L Manual De Instrucciones página 13

2. Continuous draining
Water automatically can be emptied into a floor
drain by attaching the unit with a water hose.
• Remove the water tank and attach the
drain hose to a suitable drainage facility.
Make sure the hose is attached securely
to avoid any leaks and place it as deep as
possible to ensure the right drainage.
• The dehumidifier should be placed on a flat
surface in an upright position.
• Place the end of the hose into the drain and
make sure that the water flows naturally. For
correct drai nage, make sure the hose stays be-
low the level of the drain hose outlet.
Caution: water hose
should never be bend or
twisted!
EN
• When you remove the tank, do not touch any parts
inside the unit, as you may damage the device.
• Be sure to gently place the tank into the dehumidifier.
• Do not drink or use the collected water from the
device.
• Wipe any excess water on, or in, the unit when
removing the tank.
When the continuous drainage feature is not being used,
remove the drain hose from the drain hose outlet.
x
Water
drain hose
outlet
13