Mark SUPERBAT LED WI 712 Manual De Uso página 14

EN
6.15 LIGHTING SETTING PARAMETER RESET
1) Press the 【ENTER】button in 【ST L】menu, then enter to the lighting setting parameter reset.
2) Press the 【UP/DOWN】button to select 【YES】.
3) Press the 【ENTER】button to escape and save.
Illustrations ： "ADDR" "CTST" and "PROG" are not reset, the others reset to the underlined value of the word.
6.16 【PROG】SELF-PROGRAMMING PARAMETER RESET
1) Press the【ENTER】button in 【PR L】menu, then enter to the 【PROG 】self-programming parameter reset.
2) Press the【UP/DOWN】button to select 【YES】.
3) Press the【ENTER】button to escape and save.
6.17 LIGHTING PARAMETER DOWNLOADING EACH OTHER VIA DMX
CABLE
1) Press the 【ENTER】button in 【SEND】menu, then enter to sending parameter to other lightings.
2) Press the 【UP/DOWN】button to select 【 YES】.
3) Press the 【ENTER】button to confirm sending.
Illustrations ：
1)Please disconnect the connection of projector and DMX console before sending the parameter.
2)The information of【ADDR】、【CAL】can't be sent, can't be downloaded each other.
3)There will be an automatic reset of the other projectors after receiving parameter correctly.
7. Instruction for DMX wireless module
1) There are 4 modes:
mode(blue indicator), normal mode(yellow indicator),custom mode(red indicator)
After 【RESET 】 ，and then press 【KEY】 to switch above modes, select needed mode and press 【 KEY】
2)
one second to confirm and save it.
Under receive mode, press 【KEY】 3 seconds to delete matching between light and transmitter.
3)
Under transmit mode, press 【KEY】to match receive mode, press 3 seconds will delete matched mode.
4)
5) Working in normal mode, indicator has 7 colors for option, when light and transmitter indicator are in
the same color, can receive and transmit data.
6) User - defined function is not available.
7) Notice: The transmit function is not available here.
Receive mode(green indicator),
SUPERBAT LED WI 712
transmit
- 13 -
User Manual/Manual de Uso