Memory Function - Hartmann Veroval Instrucciones De Uso

In addition to the measured values, the time, date, the associated user mem-
ory or as well as the associated memory numbers (e.g. [M] 05) appear.
The measured value is automatically stored in the displayed user memory. As
long as the result of the measurement is displayed, you can assign values to
the corresponding user memory by pressing the
assign them, the measured value is automatically stored in the displayed user
memory. You can use the results indicator on the left of the display to classify
your measurement result (see table in Chapter 3 Blood pressure information).
To switch off the monitor, press the START/STOP button
monitor will automatically switch off after 1 minute.
If you wish to stop the measurement for any reason, simply press the
START/STOP button.
and the pressure is automatically released.
If this symbol
heartbeat during the measurement. However, the measurement may also have
been disrupted by body movement or speaking. It is best to repeat the meas-
urement. If you see this symbol regularly when measuring your blood pressure,
we recommend that your doctor checks your heart rhythm.

6. Memory function

User memory
The Veroval upper arm blood pressure monitor stores up to 100 measure-
®
ments in each user memory. The most recent measured value is always stored
together with the date and time in memory slot no. 1 and all older memory
values are moved down by one memory slot. Once all memory slots are occu-
pied, the oldest value is deleted.
Memory recall is activated by pressing the
is switched off. For values saved in the first user memory, press the
for the second user memory press the
The cuff inflation or measurement is interrupted
is shown in the display, the unit has detected an irregular
or
or button when the monitor
button.
85
English
button. If you do not
, otherwise the
button,
GB