Idiomas disponibles
Idiomas disponibles
1. Do not operate the vacuum cleaner too close to heater or radiators.
2. Before inserting the power plug into the wall outlet, make sure that your hands
are dry.
3. Before you start the unit, make sure to remove large or sharp objects that might
damage the dust tank and hose.
4. When pulling out the power plug from the wall outlet, pull the plug not the power
cord.
5. Do not use without all filters in place.
6. When using, if you learn of squeak from the cleaner, it must be suction appears
to be reduced, so you must stop (make sure the cleaner is not plugging), then
clean the all air filter.
Note:
If the supply cord is damaged, it must be replaced by manufacture, service agent or
similarly qualified person in order to avoid a hazard.
WARNING:
Hold the plug when rewinding the cord. Do not allow the cord to whip when
rewinding.
USE AND FUNCTION
Assembling vacuum cleaner
Note:
Always remove the power plug from the wall outlet before assembling or removing
accessories.
1. Attaching the Flexible Hose into the vacuum connect the flexible hose into the air
intake duct, push in until you hear a "click", indicating it is in its locked position.
-21-
