Idiomas disponibles
Idiomas disponibles
tool to cool down before re-charging to
achieve the full charge.
2. REMOVE OR INSERT BATTERY PACK
(SEE FIG. B)
Press the battery pack release button and remove the
battery pack from the tool. After recharge slide the battery
pack into tool's battery port. A simple push and slight
pressure will be sufficient.
ASSEMBLY
WARNING: Remove the battery pack
from the tool before carrying out any
adjustment, servicing or maintenance.
1. ATTACHING EXTENSION LANCE TO THE
POWER NOZZLE (SEE FIG. C)
Insert the extension lance to power nozzle, and rotate it 90°
to lock it firmly.
When attaching, align the two projections on the lance with
the grooves of the power nozzle.
2. ATTACHING THE SPRAY NOZZLE
(SEE FIG. D1, D2)
Pull back the quick-lock coupling, then insert the spray
nozzle to extension lance and loosen the quick-lock
coupling. The spray nozzle is connected to extension nozzle.
when attaching, gently pulling the nozzle to make sure it is
locked into position securely.
NOTE: Choose a suitable nozzle pattern according to your
work. Spray patterns 0
, 15
o
cleaning, and the spray pattern with the symbol
suitable for watering.
WARNING: Do not shift the nozzle
pattern when the tool is powered on.
3.ATTACHING THE HOSE TO THE POWER
NOZZLE (SEE FIG. E)
Pull back the quick-lock coupling on the hose, then insert
the adaptor into the connector and loose the quick-lock
coupling to lock it.
After the draw hose is attached, check the connection by
gently pulling upon the draw hose. It should not be pulled
off.
4. ATTACHING YOUR OWN WATER HOSE
(OPTIONAL) (SEE FIG. F)
Remove the hose adapter. Attach the home garden hose
with suitable connectors.
NOTE: Except for the draw hose supplied, you can also
16
, 25
and 40
are applicable for
o
o
o
is best
connect the power nozzle to your own water hose with
suitable connectors.
NOTE: Check whether the filter screen is missing before
retightening the hose adapter. When retightening the hose
adapter, please tighten securely. Otherwise, it may not draw
any water for proper operation.
WARNING: It is not recommended to
connect the draw hose to your garden
hose or your home tap.
OPERATION
1. START (SEE FIG. G)
Press the lock-off button first, and then press on/off switch
lever to start it.
NOTE: At the first use, you need to empty the air in hose,
place the power nozzle below waist level (<1.5m), then
attach the pressure cleaning lance and set it at high
pressure. It does not start working until the water goes up
along the hose and sprays out. This could take up to 30
seconds or more depending on the fresh water source.
2. WATERING(SEE FIG. H)
It is recommended to use the 25
3. CLEANING(SEE FIG. I1,I2 )
Not recommended for use with salt water, immediately rinse
with fresh water for proper maintenance.
WARNING: Do not connect the machine
to water supplies that are dirty, rusty,
muddy, or corrosive. (Including window
cleaning liquids, plant foods, or fertilizers
etc.)
spray nozzle for watering.
0
EN
