Idiomas disponibles
Idiomas disponibles
12.1. Joystick panel troubleshooting
Problem
Spreader speed indicator flashed and trouble indicator turns on.
Trouble indicator
3 dosage indicators flash and trouble indicator turns on.
Spot application indicator
Continuous/in-row/area application indicator
Calibration indicator
Battery charge indicator flashes.
Battery charge indicator flahes once, trouble indicator turns on, and
equipment turns off.
Trouble indicator
Battery charge indicator flashes and trouble indicator turns on.
Trouble indicator
OBS*.: The accessory AG-95 Electric Spreader is sold separately.
Broken cable.
Cable discon-
nected during
Spreader speed
indicator*
Spreader motor
Spreader disk
disconnected/
badly connected
cable, or doser
Trouble indicator
Battery charge indicator
Undervoltage -
Battery charge indicator
High voltage -
Battery is not
Battery charge indicator
Overvoltage -
Battery is not
Possible
How to verify
(finding)
cause
Check integrity of spreader cables.
Check spreader connections.
equipment
operation.
Check for obstruction in motor shaft.
locked.
Check for obstruction in spreader disk.
locked.
Check if the cable is disconnected/badly
connected.
Broken or
motor fault.
Check for obstruction in doser motor.
Battery dis-
Recharge battery for at least 15 minutes.
charged.
Replace battery for an original one
from Jacto; if battery is original from
original from
Jacto, take it to an authorized technical
Jacto or it is
assistance.
damaged.
Replace battery for an original one
from Jacto; if battery is original from
original from
Jacto, take it to an authorized technical
Jacto or it is
assistance.
damaged.
How to solve
Replace spreader or look for an authori-
zed technical assistance.
Connect equipment cable.
Manually unclog motor shaft, replace
spreader or look for an authorized
technical assistance.
Manually unclog spreader disk, replace
spreader or look for an authorized
technical assistance.
In case of disconnected cable, connect
the cable correctly, contact an authorized
technical assistance in case of broken or
damaged cable.
Manually unclog doser motor or look for
an authorized technical assistance.
Charge battery on an original charger
from Jacto.
Use original battery from Jacto or take it
to an authorized technical assistance.
Use original battery from Jacto or take it
to an authorized technical assistance.
27/43
