Idiomas disponibles
Idiomas disponibles
GB
After each use and cleaning of the blade, the cutting edges should be covered with a thin layer of light machine oil. This will reduce
corrosion and increase blade life.
The blade should be replaced every two years or 50 hours.
After each operation, the grass catcher must be removed and emptied of the grass. The catcher can be cleaned with lukewarm
water with suds. After cleaning, leave the catcher in the working position until completely dry.
If the internal cable connecting the product power switch to the motor is damaged, it must be replaced by an authorised service
centre of the manufacturer. The cable cannot be repaired and must be replaced entirely. It is forbidden to operate the lawnmower
with a damaged cable.
STORAGE AND TRANSPORT
Caution! Always disconnect the product from the power supply before storing or transporting it. Clean according to the
instructions.
Store in the dark, dry, frost-free, and well-ventilated areas. The place of storage should protect the device from access by children.
The product should be stored at a temperature between 10 and 30°C. It is recommended that the product is stored in its original
packaging or another packaging that protects it from dust.
Before transporting the product, set the highest cutting height. Transport the product by carrying it by the handles. Protect the
product from impacts and strong vibrations during transport. Secure the product against slipping or tipping over during transport.
O R I G I N A L
I N S T R U C T I O N S
19
