Idiomas disponibles
Idiomas disponibles
OPERATION
Your fan is equipped with memory function. This allows more convenient operation
with the switch.
When you leave the room, if you turn off your fan with the switch, the latter will
memorize the last programmed mode.
Example: you go out of the room with ventilation in Speed 2, you switch off the fan
with the switch. When you return, using the switch, your fan will turn on with the
fan in Speed 2.
The memory function memorizes the following modes: direction of rotation, speed
of rotation.
1) On / Off: Press to switch on/off the fan.
2) Natural wind: Press once to turn on natural wind function. Press again to turn
off.
3) Speeds: Press a speed button, the fan turns on in the selectd speed.
4) Timer: Press to select the operating time until it turn off (0.30 h, 1h, 2h, 4h, 8h).
(0.30 h, 1h, 2h, 4h, 8h).
WiFi: Press the timer button for 5 seconds to enter the WiFi function, the fan will
beep continuously until the device is in the network (see the "WiFi APP" section for
configuration).
8) Bip On / Off: Press the button for 5 seconds so that the fan stops beeping.
9) Temperature :
The control receiver has a thermostat to automate the change of speed according
to the temperature under the fan.
Press the temperature button to switch the fan to temperature mode.
In this pre-programmed mode, your fan will react as follows:
Temperature
Speed
In winter mode, it has the same operation but the blades turn in the opposite
direction.
Summer/Winter
Attention! Do not change to one of these functions while the fan
is still rotating, this can severely damage it.
The summer /winter function allows you to change the direction of rotation of
your fan.
To do this, wait for your fan to stop completely, then press the direction button,
and select a speed.
You will not feel the moving air under the fan anymore, because the air is
now circulating to the top of the room, which allows to homogenize the room
0 ~ 19°
19° ~ 21°
1
2
22° ~ 24° 25° ~ 26° 27 ~ 28°
3
4
9
+29°
5
6
