Super Star 3900 Manual De Instrucciones página 22

1. Connect the red power cable with the positive (+) terminal of the battery.
2. Connect the black power cable with the negative (-) terminal of the battery.
3. Connect the DC power cable to the radio's power supply connector.
▲ We suggest not use the cigar lighter as it often bring down the voltage.
▲ Locate the power cable away from high temperature, moisture and car ignition
system.
▲ Use all full power cable even it is longer than need, and do not take off the fuse
holder from the cable.
>> Replacing the fuse:
This radio incorporate a 10 A, 250 V fuse.
If the fuse blows, determine the reason, then correct the problem.
After the problem is resolved, replace the fuse. If newly installed fuses continue to blow,
disconnect the power cable and contact your distributor or Authorized Technical Service.
1. Pull the two fuse cover in difference direction and open it.
2. Replace the broke fuse with good one, and close the fuse holder.
3. Be sure to use the recommended fuse, or can damage the radio.
English - 22 -