STARLINK Long Manual Del Usuario página 9

INSTALLATION
Instructions
6. Use the drill with the socket to drive in the
bottom screw, do not tighten with drill.
7. Ensure Long Wall Mount is level. Tighten both
screws with socket wrench.
8. While the Starlink is not in mount, disconnect
Starlink cable from mast. Route the cable from the
house's interior.
9. Carry the Starlink up to the mount and reconnect the
cable to the Starlink. Place the Starlink into the mount.
10. Use the wall clips to fasten the cable to the wall
along your route. Avoid puncturing cable and
sharp bends, and follow horizontal / vertical lines.
9.
ENGLISH
8.