Idiomas disponibles
Idiomas disponibles
- Limit the amount of sawdust present in the workplace
to a minimum: clean the area with a vacuum cleaner,
periodically check that your vacuum cleaner works
correctly and that it is in good condition.
Do not blow on the sawdust present in the machine,
use a suction device for cleaning.
- Work in a sufficiently ventilated room.
- Adopt a stable and comfortable working position.
Be sure to keep your balance at all times.
- Do not use the device in the presence of flammable
liquids or gases.
- This device must only be handled, put into operation
and used by experienced persons who are aware of the
dangers present. Minors are only allowed to use the
device within the framework of professional training
and under the supervision of a qualified person.
- Children in particular, people unrelated to the appliance
in general, must be kept away from the work area, and
in no case should they touch the electrical cable or the
appliance when it is in operation.
- Do not exceed the working capacities of the appliance
(listed in the ''Technical characteristics'' chapter).
Peligro por electricidad:
- Este dispositivo no debe exponerse a la lluvia. El área
de trabajo debe estar seca y el aire relativamente poco
cargado de humedad.
- Cuando trabaje con el dispositivo, evite el contacto
del cuerpo con objetos conectados a tierra.
- El cable de alimentación no debe utilizarse para fines
distintos a los que ha sido diseñado.
- Desenchufe el aparato después de su uso.
- Asegúrese de que el aparato esté desenchufado antes
de realizar cualquier mantenimiento, ajuste, servicio,
limpieza...
- Le recomendamos que utilice un disyuntor de corriente
residual (RCD) FI 30mA.
- ¡Solo los electricistas calificados están autorizados
para trabajar en equipos eléctricos!
Para conectar la máquina a la red eléctrica, consulte el
capítulo 4 (párrafos 4.1 y 4.2).
Moving Parts Hazard:
- The appliance can only be started when all safety
devices are properly installed.
- Keep a sufficient distance from the device in operation
and from all moving parts.
- Wait until the machine has come to a complete stop
to carry out any cleaning operation in the work area,
including cleaning sawdust, debris, wood remains, etc.
- Before each start-up, check that there are no tools or
spare parts left on or inside the device.
Danger by use:
- Check that the work pieces do not contain foreign
bodies (nails, screws, etc.).
- To avoid any risk of being caught and dragged, never
12
work on parts that contain cords, cables, tapes, threads,
wires, etc.
Personal protection:
- Wear hearing protection.
- Wear protective glasses.
The glasses you usually wear do not
provide any protection.
- Wear a dust mask.
- Wear suitable work clothes.
- Do not wear clothing that could get caught while
using the device. Do not wear ties, gloves, or looses-
leeved clothing.
- Wear a hairnet if you have long hair.
- Wear shoes with non-slip soles.
Danger due to machine failure or improper modifications:
- Assemble the device according to the assembly instruc-
tions. All parties must be correctly installed.
- Maintain the appliance and its accessories with care
(see the ''Maintenance'' chapter).
- Before any start-up, make sure that the appliance is
in good condition: check that the safety and protection
devices work perfectly, check that the moving parts work
correctly and do not get stuck.
- Only use spare parts indicated by the manufacturer.
This applies to both cutting tools and safety and se-
curity devices.
- Do not make any modifications to the parts of the
appliance.
- Any damaged part or protection device must be repaired
or replaced by an authorized repairer.
- Do not use the appliance if the switch or any part of
the electrical device is faulty.
Do not make any modifications to the electrical circuit. Have
the device repaired at an authorized specialist workshop.
- Before starting work, run the machine empty. If you no-
tice abnormal vibrations or noises, stop the appliance and
unplug it. Do not restart it until you have resolved the issue.
Destruction and disposal:
- Do not throw this device away.
- Recycle this machine in places specifically designated
for it: contact the local authorities or one of their
representatives for advice on recycling.
- Guarantee the recovery of raw materials instead of
their elimination.
- In order to protect the environment, the devices, as
well as their accessories and packaging, each must be
able to follow a proper recycling route.
1.3 ADDITIONAL SAFETY INSTRUCTIONS
- This device is designed for dry use only.
