Idiomas disponibles
Idiomas disponibles
How to use
Product description
Due to technological innovations, the product description in this manual may not completely match
your appliance. More detailed information corresponds to the final product.
1
5
How to use
Before use
Clean the appliance with warm water and detergent and dry it with a cloth.
Note: Electrical components should be wiped with a dry cloth.
Set the temperature on the temperature controller. REFRIGERATE" being the warmest and "FAST FREEZE"
being the coldest. Initially, set the temperature to an intermediate level. Place the food inside the freezer.
After using the freezer for 24 hours, adjust it to the desired temperature.
If you unplug the freezer or there is a power failure, wait 5 minutes before plugging it in again.
Temperature control
The interior temperature is controlled by an electronic thermostat. According to the ambient tempera-
ture, different types and quantities of stored products, the interior temperature can be adjusted by the
thermostat within the appropriate range.
The cooling value is reduced in steps of 1 until the minimum value is reached, and then it changes to the
maximum value. If you do not press any button for 5 seconds, or press for 3 seconds, the set temperatu-
re will be saved and return to its normal state.
Refrigerat e
Fast
Freez e
Lock button:
Press the ON button for 3 seconds, and the indicator light will flash. If no button is pressed after 30 se-
conds, it will enter the lock mode. Press the ON button for 3 seconds, the indicator light will turn off and
return to normal mode.
(Note: Because the product is constantly being upgraded, please refer to the current model).
2
4
7
6
Freez e
1
Inner cap
2
Hinges
3
Metal food basket
4
Temperature control adjust-
3
ment
5
External drain plug
6
Compressor operation indi-
cator light
7
Operation indicator light
Compressor operation indica-
tor (Green)
Operation indicator (Red)
28
English
infiniton.es
