Idiomas disponibles
Idiomas disponibles
•
Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
3
SPECIFIC SAFETY RULES
•
Know your power tool. Read operator manual
carefully. Learn its applications and limitations, as well
as the specific potential hazards related to this power
tool. Obey this instruction will reduce shock, fire or
serious injury.
•
Battery tools do not have to be plugged into an
electrical outlet; thus, they are always in operating
condition. Be aware of possible hazards when not
using your battery tool or when changing accessories.
Obey this instruction will reduce the risk of electric
shock , fire, or serious injury,
•
Do not place battery tools or their batteries near fire
or heat. This will reduce the risk of explosoion and
possibl injury.
•
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
•
Batteries can explode in the presence of a source of
ignition, such as a pilot light. To reduce the risk of
serious injury, never use any cordless product in the
presence of open flame. An exploded battery can propel
debris and chemicals. If exposed, flush with water
immediately.
•
Do not charge battery tool in a damp or wet location.
Obey this instruction will reduce the risk of electric
shock.
•
For best results, your battery tool should be charged
in a location where the temperature is more than 50°F
but less than 100°F. To reduce the risk of serious injury,
do not store outside or in vehicles.
•
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your sink, wash immediately with soap and water. If
liquid gets into your eyes, flush them with clean water for
at least 10 minutes, then seek immediate medical
attention. Obey this instruction will reduce the risk of
serious injury.
•
Keep these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you borrow someone this tool, loan them these
instructions also to prevent incorrect use of the machine
and possible injury.
•
When using flashlights or lanterns, additional
precautions should always be followed, including the
following:
•
To reduce the risk of injury, close supervision is
necessary when a product is used near children.
•
Do not contact hot parts.
•
Only use attachments recommended or sold by the
manufacturer.
English
•
Do not use in the rain.
•
To reduce the risk of electrical shock, do not put in
water or other liquid. Do not place or store product
where it can fall or be pulled into a tub or sink.
Replace with specific part of product in question.
•
To reduce the risk of injury, do not stare at operating
lamp. Serious eye injury could occur.
4
SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
tool better and safer.
Symbol
V
min
n o
5
RISK LEVELS
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM-
SIGNAL
BOL
DANGER
WARNING
CAUTION
CAUTION
5
Explanation
Volts
Minutes
No load speed
Direct Current
Read and understand all instructions
before operating the product, and fol-
low all warnings and safety instruc-
tions.
MEANING
Indicates an imminently haz-
ardous situation, which, if not
avoided, will result in death
or serious injury.
Indicates a potentially hazard-
ous situation, which, if not
avoided, could result in death
or serious injury.
Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.
(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.
EN
