Windgoo T8 Manual Del Usuario página 6

2. Instructions for installation
Step 1: Open the product
Step 3: Insert the stem
3. Instructions for use of dashboard
ON/OFF
Gear shift
Light
Battery status
Speed status
Mileage statistics
Take the product out
of the packing box and
open it in this direction
Assemble the stem
Press and hold the start button for 3S, then after the buzzer sounds,
the scooter will turn on/off
Speed mode: E gear: 10KM/H N gear: 15KM/H S gear: 25KM/H
Adjustment method: double-click the button to switch the S, N and E
gears in a cyclical way
Click the button once to light up the headlight, taillight, button light and
instrument taillight symbols, and then after the buzzer sounds, the
lights will turn on/off
1-6 grids indicate power. Please charge in time if it is lower than 2 grids
The last two digits of the digital screen display the current speed, and
the maximum value is 25KM/H
TPress the button three times consecutively in the power-on state to
display the current mileage with two flashing digits (the current mileage
will be cleared after riding shutdown), and then click the button again to
display the total mileage with four flashing digits
Step 2: Lock the folding mechanism
Lock the folding
mechanism
Step 4: Lock the stem screws
Lock the stem screws
06