TRIPOD THREAD
The Lomo'Instant Automat comes with a standard ¼" tripod thread. To mount the
camera on a tripod, simply screw the tripod screw into the Tripod Thread
bottom of the camera.
REMOTE CONTROL LENS CAP
The lens cap of Lomo'Instant Automat functions as a remote shutter release
via infrared transmission. There are two buttons on the remote lens cap, one
for Auto Shooting Mode and one for Bulb Mode. To use the remote shutter
release function, point the Infrared Transmitter
Cap towards the Remote Control Front Receiver
Receiver
and simply press the the respective button on the lens cap for the
rc6
desired shooting mode.
INSTANT Button rc2: in Auto Shooting Mode press the INSTANT Button
e
for normal shutter release.
TIME Button rc3: in Bulb Mode, press the TIME Button
e
camera shutter for exposure, then press the button once more to close the
camera shutter for the end of exposure. The maximum shutter speed in Bulb
mode is 30 seconds. If you want to expose longer than 30 seconds, you may
use the multiple exposure function to expose the same film multiple times to
accumulate exposure time. (For multiple exposures, please see chapter above.)
of the Remote Control Lens
rc1
or Remote Control Back
rc5
once to open the
rc3
at the
21
rc2
ENGLISH / 16