EN
Problem encountered
Machine does not turn on.
Power light
is off after having
pressed the start-up/stand-by button.
The machine requires a lot of time to
heat up.
The machine is very noisy.
Red flashing light
.
The coffee flows out too fast and no
creamy froth forms on the surface.
No coffee flows out or it just drips out
slowly.
No coffee flows out and the drip tray fills
with water.
• Nominal Voltage - Power Rating - Power Supply:
See label on the appliance
• Measurements:
Height
253 mm
• Weight: approx. 2.8 kg
• Water tank: 0.5 L - Removable type
TROUBLESHOOTING
Possible causes
» M achine is not connected to the power
source.
» T he machine has limescale build-up.
» No water in the tank.
» W ater tank fitted incorrectly or
absent.
» Coffee knob in wrong position.
» Capsule already used.
» Dispensing spout is clogged.
» Coffee knob in wrong position.
TECHNICAL SPECIFICATIONS
Width
Depth
145 mm
290 mm
Solution
» Connected the machine to the power source.
» Contact customer service.
» Descale the machine.
» Top up the tank with fresh drinking water.
» Fit the water tank correctly.
» T urn the coffee knob to the stop position.
» Contact customer servicea.
» R eplace the capsule inside the capsule holder drawer
with a new one.
» Clean the coffee dispensing spout
(see MAINTENANCE AND CLEANING).
» T urn the coffee knob to supply position.
• Housing materials: Thermoplastic
• Cable Length: 0.8 m
• Thermo fuses
• Instantaneous aluminum boiler with temperature probe