E N
Problem
Machine won't turn on.
The pod loading lever does not
reach the closing position.
Pump won't start.
Machine won't supply coffee.
Coffee is not hot enough.
the espresso cream cannot be
obtained.
E N
materials
18
TROUBLESHOOTING
Possible cause
The machine has not been con-
nected to the power mains.
The drop / used pod collecting
tray is full.
The pod has been put in wrongly.
The pod has not been put in.
The optimum temperature has
not been reached.
The pod loading lever has been
lifted.
The cups are cold.
Too much coffee water has been
supplied.
A used pod has been put in.
TECHNICAL FEATURES
The technical features are shown on the data plate
found on the machine.
Solution
Verify that the plug has been cor-
Empty the drop / used pod col-
lecting tray.
Lower the pod loading lever and
correctly put the pod in.
and non-effervescent water, then
charge the hydraulic circuit again.
Put the pod in.
is reached.
Lower the pod loading lever.
and non-effervescent water, then
charge the hydraulic circuit again.
Pre-heat the cups by supplying
hot water to them.
last coffee has been supplied.
Put a new pod in.
2006/42 CE – 2004/108 CE – 2006 /95 CE