Idiomas disponibles
Idiomas disponibles
EN
1
DESCRIPTION
1.1
PURPOSE
The standing light provides a safe, portable, and
powerful source of light when needed.
1.2
OVERVIEW
1
8
7
1 ON/OFF Switch
2 10 W Spotlight
3 12 x 0.5 W LED
Ring
4 Extendable LED
Tube
2
GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
2.1
WORK AREA SAFETY
•
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
2
3
5 Tube Compression
Ring Clamp
6 Leg Clamps
7 Battery Housing
8 Storage Strap
WARNING
English
•
Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
2.2
ELECTRICAL SAFETY
•
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
•
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
2.3
PERSONAL SAFETY
•
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
6
lapse of attention while operating power tools may
result in serious personal injury.
•
Use personal protection. Always wear eye
protection. Protective products such as dust
mask, non-skid safety shoes, hard hat or hearing
protection used appropriately will reduce personal
injuries.
•
Do not over-reach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
2.4
BATTERY TOOL USE AND CARE
•
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
•
Use power tools only with specifically
designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
•
When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or fire.
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
•
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
•
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion.
4
