Idiomas disponibles
Idiomas disponibles
GENERAL USE
Getting Started
Turn the red main Power Switch, located on the right side of the
1.
Blender Base, to ON.
The Power button will flash.
•
Press Power once to turn your Infinity Blender
2.
The LED display will show the default time for the selected
setting.
Turn the dial to choose your desired blending function.
3.
Press Start/Pause to start blending.
4.
Press Start/Pause again to stop blending.
5.
When the Infinity Blender
Pro Plus is finished blending, it will
6.
™
beep 5 times and "0:00" will be displayed.
Press Power again and turn the red main Base Power Switch
7.
to OFF to turn your Infinity Blender
Time Setting
Use the Up and Down arrows to increase or
decrease the time on the display.
Times are displayed in minutes and seconds.
•
Blending times can be adjusted in 1-second
•
increments when using any setting.
Example:
Press Power. Turn the dial to Ice. "00:15" (15
seconds) will be displayed. Use the Up and Down arrows to adjust
the time. Press Start/Pause.
Numbered Settings
For standard blending, you can select your blending speed from
one of the numbered settings between 1 and 10.
Turn the dial to your desired setting between 1 and 10.
1.
Adjust the time, if desired, then press Start/Pause to begin
2.
blending at your selected setting.
Adjust the number setting using the dial at any point while
3.
blending, if needed.
Pulse Function
The Infinity Blender
Pro Plus offers two Pulse functions where the
™
power settings are fully adjustable.
14
general use
Pro Plus on.
™
Pro Plus off.
™
00:15
1. Press Pulse 1 for short bursts of blending at low power (25%
Power).
Press and hold Pulse 1 for continuous blending. The display
•
will show "3:00". Once the button is released, blending will
end.
The percentage of power used can be adjusted by holding
•
Pulse 1 and rotating the dial. The percentage will change in
10% increments.
2. Press Pulse 2 for short bursts of blending at high power (100%
Power)
Press and hold Pulse 2 for continuous blending. The display
•
will show "3:00". Once the button is released, blending will
end.
The percentage of power used can be adjusted by holding
•
Pulse 2 and rotating the dial. The percentage will change in
10% increments.
Icon Setting
For more specialized blending tasks you
can select one of the preset icons with
the dial. Each icon setting has a default
time and RPM.
Turn the dial to your desired icon setting. The LED display will
1.
show the default time.
Adjust the time, if needed, then press Start/Pause to begin
2.
blending at your selected setting.
If desired, increase or decrease the time at any point while
•
blending.
Notes:
When blending for a long period of time, steam may escape from the
•
Plunger Cap.
Always start with cold liquids when blending. DO NOT add hot
•
liquids to the blender.
Do not fill the Jar above ¾ capacity (42oz.).
•
0
Start
Pulse
Pulse
1
2
Pause
15
nuwavenow.com
