Svan Bouncer Manual Del Usuario página 5

Bouncer-manual.qxd
ATTENTION: When you receive the Svan Bouncer for the first time, it is already
partially assembled in the box. To finish the assembly, go directly to Step 5 below.
Step 1: Fabric Adjustment
Step 2: Put the Backrest into the cloth pocket
Step 3: Attach the Harness sides
Step 4: Attach the Fabric to the wooden Arch
06-05-04 15.26 Sida 5
Assembly Instruction
Make sure that the adjustment strap is on the outside of the
fabric.
Insert the wooden Backrest into the pocket in the back of the
Fabric. Simply place the Backrest into the pocket and thread
the elastic band over the edges of the Backrest. Secure the
Backrest by attaching the two (2) snaps together.
Pull each Harness side through the holes in the back of the
Fabric. Lead with the button hole, not the snap.
Attach the Harness sides to the Backrest with the snaps on the
ends.
Place the Arch around the outside of the Fabric with the "V" notch
facing up. Attach the Fabric to the Arch with eleven (11) snaps.
– 5 –