DJI DL Guía De Usuario página 5

Installing the lens to Zenmuse X9-8K Air
The following instructions use the DJI DL 18mm F2.8 LS ASPH lens as an example.
1. Toggle the lens locking lever to the unlocked position ① , then press and hold the lens
release button and rotate the camera body cap to detach it ② .
2. Remove the lens cap and rear cap.
3. Align the two red dots on the camera and the lens
camera body.
4. Rotate the lens clockwise until hearing a click
mounting to make sure it is firmly attached.
5. Toggle the lens locking lever to cover the orange line on the camera
* The installing steps may differ when mounting the lens to different X9 gimbal cameras. Read the
corresponding product model user manual for installation details.
• Make sure to mount the camera lens with the lens mount facing downward to prevent
dust from entering the sensor. Otherwise, the performance may be affected.
• DO NOT press the lens release button while mounting the camera lens.
2
2
1
3
DJI DL/DL-S LENS User Guide
*
, and then insert the lens into the
③
. Rotate the lens counter-clockwise after
④
⑤
4
5
©
until the lever is secure.
2023 DJI All Rights Reserved.
3