Babify City Fix Manual De Instrucciones página 46

EN
Refitting the 5-point harness system and cover
After washing, place the
cover on the shell, pull the
cover around adjusting
device down and insert the
cover around the edge of
adjusting device.
Pass the strap clip
through the strap clip
slot. Then pull both sides
of covers as shown in
picture and cover both
sides of holders.
Pass the end of the
shoulder strap through
the harness slot, fix into
shoulder strap axle, and
lock the shoulder strap
axle to the seat shell.
Also put the end of the harness strap
through the harness strap slot and shell,
fix into the strap yoke. Make sure the seat
straps can not be rotated.
Close the buckle, then fasten the cover
all around. Close the snap buttons on the
back. Check that it works!
46