Wiseup GL7100 Manual Del Usuario página 3

5.1 Power on the camera by pressing and holding down the power button for 3 seconds, the red
indicator light will be turned on and flash 5 times slowly, then keep flashing quickly, the camera will
start video recording automatically.
5.2 Press the power button once to stop video recording, the red indicator light will be solid on for
about 3 seconds and then keep flashing, indicating that the camera is back to standby mode
already.
5.3 Press the camera button once to take a photo, the red indicator will blink once every time you
take a photo, then keep flashing again.
5.4 Power off the camera by pressing and holding down the power button for 5 seconds, the red
indicator light will be turned off.
VI. Set Date and Time Stamp
6.1 Power off the camera.
6.2 Remove the memory card from the camera.
6.3 Insert the memory card into a proper PC by using a card reader.
6.4 Removable disk drive folder appears.
6.5 Click on the drive in the root directory and inside the root directory, create a TXT document file
named "time.txt".
6.6 Input the current date and time in the txt file with the correct format:
Year.Month.Date Hour:Minute:Second (For example: 2018.12.19 13:40:49)
6.7 Save the file, insert the memory card into the camera.
6.8 Power on the camera, the system will upgrade the program automatically.
3 / 24