Installation
Please install batteries into the
device before using it.
1. Open the battery cover on
the back of the device.
2. Insert 6 x 1.5V AA brand new
Alkaline batteries into the
battery compartment. Make
sure the polarity is correct.
3. Close the battery cover.
*There is a 32G Micro SD Card included in the package.
1. Open the card slot cover, you will see the card slot.
2. Insert the Micro SD card into the slot. Make sure the direction is
right. Never insert the card forcibly.
3. Format the Micro SD card, this can improve the compatibility of
the Micro SD card.
4. To remove the card from the memory card slot, press the edge of
the memory card gently, the card will pop out. Then remove the card.
Note:
a. The device will prompt 'Please insert the Micro SD Card' if the TF card
is not being installed.
3
1) Install Battery
2) Inserting Memory Card