Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
Regular cleaning and correct
maintenance will ensure the working
efficiency and prolong the working life
of the ice maker.
Turn off the power and pull out the
plug before cleaning.
Do not use solvent-based cleaning
agents, which may damage the
machine or cause retention of harmful
substances.
Do not rinse the outside of the machine
directly with water, but wipe with a wet
cloth instead.
Dry the inside and outside of the
machine with a soft and clean cloth.
Check regularly whether the drain plug
is loose to prevent leakage.
Clean it after first use or after being left
idle for a long time.
Disinfection solution: Water and
vinegar or citric acid (ratio: 10:1)
Wipe the interior with a neutral
cleaning agent, including the hand-
touchable evaporator (icing column)
Add potable water, run the ice maker,
and discard the ice cubes produced
in the first four cycles. Then remove
the remaining water from the drain
and reinstall the drain plug under the
bottom of the appliance, to ensure that
the plug is in place.
Use a clean, soft cloth to clean the
remaining watermarks.
If the ice maker is not used for a long
time, cut off the power supply and
remove the remaining water from the
drainage outlet. Dry the interior with a
clean, soft cloth.
If the ice has a strange taste, or if the ice
has an unpleasant or mildewy odor in
the machine, refer to the steps above to
clean the inside of the machine.
It is forbidden to clean the ice machine
with flammable liquids. Failure to com-
ply might result in fire or explosion.
29
GB
