Idiomas disponibles
Idiomas disponibles
CVS-MW1-4Y IB-080421-FINAL.qxp_MLU3AC1-JAN05-2 8/9/21 12:58 PM Page 19
Comment
If it is not possible to fit the cuff to your left arm, it can also
be placed on your right arm. However, all measurements
should be made using the same arm.
Comparable blood pressure measurements always require the
same conditions (relax for several minutes before a reading).
5.4. Taking a measurement
After the cuff has been appropriately positioned the
measurement can begin. Remain still during your measurement,
do not flex muscles.
a) Remain seated quietly for 5 minutes before you begin the
measurement.
b) Press the POWER button to begin. After pressing the POWER
button you will hear a series of short beeps and the pump
begins to inflate the cuff. The measurement is performed while
cuff inflates. The pumping speed can vary, which is completely
normal.The increasing cuff pressure will show on the display.
c) When the device has detected the pulse, the heart symbol in
the display begins to blink, and a cuff signal is shown.
d) When the measurement has been concluded, the air will automat-
ically release from the cuff. The measured systolic and diastolic
blood pressure values, as well as the pulse, are now displayed.
e) The measurement results are displayed until you switch the
device off. If no button is pressed for 1 minute, the device
switches off automatically.
f) When the unit is set to the MAM (Measurement Averaging
Mode) setting, 3 separate measurements will take place in
succession, after which your result is calculated and displayed
as a single, averaged measurement. There is a 15 second
resting time between each measurement. A count-down
indicates the remaining time and a beep will sound for 5
seconds before the 2nd and 3rd readings begin.
If one of the measurements causes an error message, it will be
repeated one more time. If any additional error occurs, the
measurement will be discontinued and error code displayed.
Cuff on
right arm
Pumping
Pressure
Measuring
Systolic
Diastolic
Pulse
Measurement
Complete
19
