Idiomas disponibles
Idiomas disponibles
Safety warnings for
Sanders
CAUTION
• Observe applicable regulations when
sanding painted surfaces. Use extra care when the paint is
lead-based.
• Remove dust and any other type of debris to assure a
safe working environment. When possible use a vacuum
cleaner or a dust extractor.
CAUTION
• To be protected against dust and smoke
generated when sanding everybody in the work area
should wear a professional breathing mask.
• Do not use this tool to sanding pieces containing
magnesium or asbestos.
• After long work cycles the metallic outer parts and
accessories may get hot.
CAUTION
• Use a
breathing mask and cartridges suited for paint dust and
vapors. Regular painter masks do not offer the right
protection.
Parts
Front
Handle
Sander Pad
Start Up
Selecting the Sanding Sheet
• Before setting up the sander select the right grain for
the job.
• Grains available vary from very coarse to very fine.
• Coarse grain is used to sand rough surfaces, medium
grain for light work and fine, for finishing purposes.
• Is advisable to test with disposable pieces to determine
the right grain for each particular job.
• Do not use the same sheet to sand wood or metal.
Metal particles may embed into the sander and damage
the wood surface.
professional
Sanding Sheet
Clamp
WARNING
• Do not allow children and pregnant
women enter the work area.
WARNING
• Remove the dust collecting container
(not included) before sanding metal. Sparks may ignite
dust and the inner pouch.
• Do not use worn or ripped sanding sheets.
• Do not touch the sanding sheet when moving.
• Before sanding, double-check all foreign objects such as
nails or screws are removed from the work piece.
WARNING
• Hold the tool by the insulated
gripping surfaces. The sander belt could make contact
with its own feeding power cable.
Contact with a power conducing cable makes the tool
metal parts are also powered and give the operator an
electric shock.
Continuous
Use Button
Switch
Handle
Dust
Extraction
Cleaner Adaptor
Duct
• In case the sanding sheet installed has no matching
orifices, punch the holes so that the dust extraction
system works right.
Grain
Type
60 or lower
very coarse
80 - 100
coarse
120 - 150
medium
180 - 220
fine
240 or higher
very fine
Power Cord
Protector
Power
Cord
Vacuum
ENGLISH
5
