Concept 10006582 Manual Del Usuario página 8

1. Pay attention to the height and
position when installation.
3. Insert the wall mounting bra-
cket into the hole of the hand on
board. Place the mounting bra-
cket with the arrow with "Top" in-
dication pointing up.
1. Adjust the timer switch to "OFF", then connect the plug to 230V ~ 50Hz.
2. Place the hoses in the boots or shoes that needs to be dried.
3. When select timer switch to "ON", the dryer is working.
4. Turn the timer to the desired time-the dryer will start and the control lamp will light.
8
Mounting
Use and Operation
2. Fasten two screws, and then fix
them with the hand on board.
4. Insert the bolt to the hole of hand
on board.